Linux utility for listing SCSI devices. Version 0.31 2020/02/20 [svn: r160] - cleanup gcc-8 warnings, no cleanup needed for gcc-9 - fix issue where host managed ZBC devices don't output their size. [Fix also for RBC and CD/DVD.] - exclude NVMe listings when --classic given - fix hex counting issues - supply "-" for generic NVMe device one line output so 'lsscsi -gb' output is consistent Version 0.30 2018/06/12 [svn: r154] - add support for NVMe devices and controllers - to build without: ./configure --disable-nvme-supp - deselect at runtime: lsscsi --no-nvme - deselect SCSI devices at runtime: lsscsi N - add --brief for tuple + device_name(s) only - add --pdt (-D) for device type in hex - extend --size (-s) so when given three times the size as a logical block count is output - add --sz-lbs (-S) that is equivalent to '-sss' when used twice adds comma then logical block size - '-w' now decodes 128 bit WWN without truncation - /dev/disk/by-id/wwn- is not guaranteed to be persistent (or stable); instead use /dev/disk/by-id/scsi- - '-t' on a FC host was not printing the comma separator resulting in garbled output, fix - debian: bump compat file contents from 7 to 10 Version 0.29 2016/05/14 [svn: r137] - '-u' now decodes locally assigned UUIDs (spc5r08) - as last try use T10 Vendor ID for lu name - if no lu name found, print 'none' - change '-uuu' to output the full lu name followed by the normal fields (which were skipped before) - add 'U' option, same action as '-uuu' - '-UU' prefixes lu names with 'eui.', 'naa.', etc - if '-s' given twice, lu size is base 2 related - if very long [h:c:t:l] then append space - print_enclosure_device() for FCP may be useless, comment out while checking ... - with '-t' print 0x0000000000000000 for non-SAS device in SAS domain - autogen.sh: upgrade to 20091223 version - automake: upgrade to 1.15 (ubuntu 16.04) Version 0.28 2014/09/30 [svn: r120] - fix handling of scsi_level 0 (no compliance) - add SRP transport identifier - add --unit option for LU identifier (>= lk 3.15) - add (S)ATA transport identifier (>= lk 3.15) - make USB transport ids more consistent - fix FC transport id missing comma - add pdt strings for security manager and zbc - upgrade automake to version 1.14.1 Version 0.27 2013/05/08 [svn: r111] - rework buffer handling for systems with many disks - add --lunhex option for displaying LUNs in hex - accept LUNs from sysfs as large as a 64 bit unsigned decimal number (largest was signed 32 bit decimal) - accept LSSCSI_LUNHEX_OPT environment variable - add scsi_id option for /dev/disk/by-id/scsi* Version 0.26 2012/01/31 [svn: r97] - add 'fcoe' transport indicator - add '--wwn' option, datamine /dev/disk/by-id/wwn* - move lsscsi.c into src directory Version 0.25 2011/05/09 [svn: r92] - add sas_port and fc_remote_ports transport information - print enclosure_device entry - add '--size' option to show size of disks - add '--protmode' option to show protection information mode Version 0.24 2010/06/12 [svn: r83] - FC transport syntax changes (colon to slash) - add "(null)" to the currently accepted "" as the string representation of NULL - add AM_MAINTAINER_MODE to configure.ac - scandir() library function has changed its signature in its 4th argument, use newer (non-void) variant Version 0.23 2009/12/01 [svn: r76] - remove /proc/mounts scan for sysfs mount point, assume /sys unless overridden by re-instated '--sysfsroot' option Version 0.22 2008/12/26 [svn: r71] - add protection information (see CREDITS file) - add USB transport type with USB device name - add ATA and SATA transport types (crude: by driver name) Version 0.21 2008/7/10 [svn: r64] - more sysfs scanning work needed for lk 2.6.26 Version 0.20 2008/7/9 [svn: r43] - Handle SCSI midlayer rework circa lk 2.6.25/26 - this fix needed if CONFIG_SYSFS_DEPRECATED_V2 is not defined in the kernel build (lk 2.6.26) - clean superfluous files from package Version 0.19 2007/1/25 [svn: r37] - add transport information (target + initiator) - start with FC, SAS, SPI, iSCSI and SBP - alter ISCSI for 2.6.20 changes - SAS fix for lk 2.6.20 (SYSFS_DEPRECATED=n) - enhance host name search when proc_name is "" - implement filter option for '--hosts' - accept 'host' as first item in filter to mean host - output more host attributes when '-Hll' given - add '--list' (or '-L') option output attribute=value entries, one per line Version 0.18 2006/3/24 - cope with dropping of 'generic' symlink post lk 2.6.16 - anticipate the future removal of 'tape' symlink Version 0.17 2006/2/6 - fix disappearance of block device names in lk 2.6.16-rc1 Version 0.16 2005/12/30 - clean up peripheral device type naming - properly identify osst and changer devices - add debian build directory Version 0.15 2005/6/29 - option '-ll' gives more attributes and '-lll' gives attributes one per line - change reporting if device node: - use "match major+minor" with "/dev" directory (default) - use synthetic device node names when '--kname' given {this was the default in earlier versions} - add filtering, sync with lk 2.6.12 {e.g. 'lsscsi 1' lists all SCSI devices on host1} - convert to autotools - builds on version 0.13 (does not use libsysfs) {because dlist_sort_custom() does not have filter() callback} Version 0.14 2004/9/20 - version of 0.13 based on libsysfs-1.20 Version 0.13 2004/8/20 - add 'timeout' to long device option output - quiet (unless verbose) if no mid level (hence no SCSI devices or hosts) Version 0.12 2004/5/9 - rework for lk 2.6.6 - add proc_name for hosts - replace 'online' with 'state' for scsi devices - add '-d' option to output device node's major and minor numbers Version 0.11 2004/1/9 - rework for lk 2.6.1 - drop "--name" argument Version 0.10 2003/5/6 - adjust HBA listing (-H) for new struct scsi_host in lk 2.5.69++ Version 0.09 2003/4/4 - fix up sorting - add GPL + copyright notice Version 0.08 2003/3/2 - start to add host listing support (requires >= lk 2.5.63) Version 0.07 2003/2/10 - sysfs changes name of current_queue_depth in lk 2.5.60 Version 0.06 2003/1/20 - fixes of osst devices - use "cd" rather than "CDROM" for short peripheral type name Version 0.05 2003/1/19 - output st and osst device names (rather than "-") - support --generic and --classic together - output type (SCSI peripheral type) with --long Version 0.04 2003/1/14 - make sure a st device list only once (needed for lk 2.5.57) Version 0.03 2003/1/9 - fix Makefile to create man page directory on install - add logic for scsi_level output - add --generic (-g) switch to output scsi generic device file name Version 0.02 2002/12/18 - first entry in CHANGELOG