Each utility has its own version number, date of last change and some description at the top of its ".c" file. All utilities in the main directory have their own "man" pages. Changelog for smp_utils-0.99 [20200305] [svn: r171] - smp_discover(_list): add --dsn option to show device slot number in single line per phy summary - attached SAS device type, word SAS added (spl4r01) - add SAS connector types, shared with NVMe (ses3r8) - add buffered phy burst size field (spl4r07) - add attached apta capable field - update phy capabilities decode (spl5r02) - use Report general to get number phys rather than loop until an error occurs - smp_rep_general: add extended fairness field - add initial time to delay expander forward open indication field - add external port field (spl5r02) - smp_phy_test: change default linkrate from 3 to 6 Gbps which is value 0xa - smp_conf_phy_event: fix file pointer leak - add G5 (22.5 Gbps for SAS-4) settings [spl4r06] - convert many two valued ints to bools - smp_lib: - add smp_get_connector_type_str(), smp_get_num_nomult() and smp_get_llnum_nomult() - add dStrHexErr() and dStrHexStr() - add hex2stdout, hex2stderr and hex2str - add smp_is_big_endian(), smp_all_zeros() and smp_all_ffs() - add sg_unaligned.h and sg_pr2serr.h headers - change connector name: 'SAS SlimLine' to 'SlimSAS' - sync with spl5r08 - cleanup configure.ac + Makefile.am - update BSD license from 3 to 2 clause aka FreeBSD license (without reference to FreeBSD project) - debian: bump compat file contents from 7 to 10 Changelog for smp_utils-0.98 [20140526] [svn:r138] - add Linux aacraid support, interface name : aac - device name has form /dev/aac[N[,E_ID]] - smp_discover, smp_discover_list: in 1 line summary use routing attribute "U" instead of "T" if "table to table supported" set in report general response - output device slot (group) number if len > 109 - add 'attached persistent capable' bit (spl3r2) - add pwr_dis_* fields (spl3r3) - add '--cap' option to decode phy capabilities - change 'end device' to 'SAS or SATA device' - smp_discover: '-mm' produces full output for each phy - smp_rep_broadcast: add broadcast type names - smp_general: add 'initiates ssp close' and 'ssp maximum connect time limit' fields (spl3r04) - add support for mpt3ctl (Linux LSI 12 Gbps HBAs) - change binary install from /usr/sbin to /usr/bin since sbin caused problems - examples folder scripts cleanup - make code more C11/C++ friendly Changelog for smp_utils-0.97 [20120120] [svn:r116] - smp_conf_phy_event: new utility - change to ./configure style build and use smputils runtime and development libraries - change binary install from /usr/bin to /usr/sbin in debian and rpm (.spec) scripts - sync to SPL-2 (spl2r03) - take resid into account when calculating the actual response length - smp_rep_phy_event, smp_rep_phy_event_list: add --enumerate option to list Phy Event Source names - smp_read_gpio, smp_write_gpio: move register type, index and count fields in enhanced variants - add solaris and freebsd ports Changelog for smp_utils-0.96 [20110620] [svn:r96] - smp_conf_zone_perm_tbl, smp_conf_zone_man_pass smp_conf_zone_phy_info, smp_ena_dis_zoning, smp_rep_broadcast, smp_rep_phy_event, smp_rep_phy_event_list, smp_rep_self_conf_stat, smp_rep_zone_man_pass, smp_rep_zone_perm_tbl, smp_zone_activate, smp_zoned_broadcast, smp_zone_lock, smp_zone_unlock: add these new utilities - all utilities: sync to SPL-2 (spl2r01) -those with '--phy=ID' option: increase max from 128 to 254 - smp_discover, smp_discover_list: add --adn and --summary - make --summary default if --phy=ID option not given - with --summary show disabled and errored phys - smp_discover: add --my and --zero option - smp_discover_list: add --zpi=FN option - smp_rep_general, smp_rep_manufacturer, smp_rep_phy_err_log, smp_rep_phy_sata: add --zero options - smp_conf_general: add --power option - smp_read_gpio, smp_write_gpio: add --enhanced option - add examples directory, mainly for zoning - remove doc/smp_utils.html , refer readers to web page - remove tpl (ai) interface Changelog for smp_utils-0.95 [20101116] [svn:r47] - place link to smp_utils.html examples in man pages - alter Makefile for non-root users - add spl-r04 discover changes (spl is upper layers of sas-2.1) - mpt: cope with mpt2 ioctl that uses a different magic number Changelog for smp_utils-0.94 [20081229] [svn:r40] - smp_discover: sync to sas2r15 - smp_discover_list: sync to sas2r15 - smp_rep_general: sync to sas2r15 - smp_rep_exp_route_tbl: sync to sas2r15 - smp_lib: sync to sas2r15 - sgv4: more detail in error messages - sgv4: drop scsi.h include, gives problems with lk 2.6.27 - mpt: allow either /dev/mptctl or /dev/mpt2ctl [10;220-221] - warn if target SAS address is 0x00000000 when -v given Changelog for smp_utils-0.93 [20080106] [svn:r7] - sgv4: add new interface - smp_phy_control: sync with sas2r10 - smp_rep_phy_sata: affiliation contexts, added sas2r08 - smp_discover: add '--list' option for attribute=value output - smp_rep_general: sync with sas2r09..12 - smp_discover, smp_discover_list: sync with sas2r09..12 - warn if expander's SAS address is different from requested - add smp_rep_exp_route_tbl utility - abridge output from responses when prior to SAS-2 - rename this file from CHANGELOG to ChangeLog - place code in subversion repository - move smp_lib.h into include directory - move man pages into doc directory - add 'conforms to' section - fix FreeBSD build Changelog for smp_utils-0.92 [20061208] - all: suggest using '-v' if smp_send_req() fails - smp_lib: sync function names and results with sas2r07 - smp_rep_general: sync with sas2r07 - smp_rep_route_info: add '--multiple' and '--num=" options. Underlying SMP function may be called multiple times to show one line per phy's route table. - smp_lib.h: add C++ 'extern "C" ' wrapper - smp_discover+smp_discover_list: sync with sas2r07 - smp_conf_general: add new SMP function - smp_utils.8: suggestions for finding expander SAS addresses and mptsas ioc_num - Makefile.freebsd: builds utilities on FreeBSD - man pages: cleanup Changelog for smp_utils-0.91 [20060822] - add '--multiple' to smp_discover - add uniform exit status values (see 'man smp_utils') - fix affiliations flags in smp_rep_phy_sata - report bad operation abbreviations in smp_phy_control - add '--change_report' option to smp_rep_general - improve mpt error detection and reporting - add information to COVERAGE file - smp_rep_general: add physical presence and zoning bits - smp_phy_test: add new SMP function - smp_discover_list: add new SMP function - smp_conf_route_info, smp_phy_control, smp_phy_test: add '--expected=' option to set "expected expander change count" in request Changelog for smp_utils-0.90 [20060611] - add smp_read_gpio utility (READ GPIO REGISTER) - add logic to read SMP_UTILS_DEVICE and SMP_UTILS_SAS_ADDR environment variables if those options not on command line - add smp_conf_route_info (CONFIGURE ROUTE INFORMATION) - add smp_write_gpio (WRITE GPIO REGISTER) - add debian build infrastructure - add smp_utils.html to doc subdirectory